The base of The Bent Pyramid has for quite some time been assumed to equal either 360 or 362 cubits

The height of the second part has been given a distance or height of 57.67 meters or about 110 cubits (110.12 if 57.67 is accurate). Since there were no corners hidden on this level we should assume that this distance is close to being correct as recorded. Logic would dictate that this height is actually 110 cubits or about 57.61 meters. This is a difference of about 2.33 inches

IF

the height of the bent is correct as shown and is 200 cubits the bottom portion would be 90 cubits in height.

This gives us 9 to 11 or 9/11ths and this is EXACTLY what the Giza Plateau Grid gives us which is 36 x 44 or 36 x 39.37 by 44 x 39.37 or simply 1417.32 cubits by 1732.28 cubits and this is of course the rectangle which encloses the Giza Plateau.



Clive Ross has calculated the outer angle measured between center points as being 191.4 degrees. It is my understanding after studying this pyramid that the angle measured from the outer slope around to the bottom slope ON THE OUTSIDE yields this same angle of 191.4







So it would appear that either Giza was a template for The Bent or that The Bent was the template for The Giza Plateau.

Regards
Don Barone





"There is nothing as impenetrable as a closed mind"
and ..." if everything is a coincidence what is the point of studying or measuring or analyzing anything ?" db