Home of the The Hall of Ma'at on the Internet
Home
Discussion Forums
Papers
Authors
Web Links

May 2, 2024, 5:50 am UTC    
September 12, 2008 05:17PM
MJ Thomas Wrote:
-------------------------------------------------------
> I wrote, ‘Why you didn’t mention this course level
> in your opening post is beyond me.’
>
> You reply, ‘Why is the course level so important?
>
> Are you assuming course levels relate directly to
> the height of the KC? They don't with the QC so
> why this chamber?’

MJ...!!!!

I told you...I'm not interested in the course levels...!

> Clive, several Pyramid theorists believe that the
> course heights (single and or cumulative) and
> numbers (up from base) of the Pyramid’s courses
> have intentional mathematical significance.

They do have mathematical connections...some are geometrically connected to the external dimensions of the structure. But what does that have to do with this post? Why can't you understand my simple typed statement...I don't give a hoot!

> It happens that I do not know whether or not you
> belong to this school of thought.

I question "everything" relating to this structure...I refuse to walk away with the concept that these course thickness are not intentionally design...course #118 dictates this fact. But please...stay on topic...not interested in another off-the-track discussion.

> You write, ‘However...if you think...you will
> realize that both center points are directly above
> the inner peak of both gable roofs.’
>
> The entire point of my post was that the centres
> of your two circles are both around 30” above the
> apex of a chamber’s sloping ceiling, and were not,
> therefore, directly connected to these apexes.

You don't know if they are connected or not...and neither do I. but that is not what this post is all about.

> However, because the centres of your two imaginary
> circles correspond closely to a course level, I
> think it was perfectly reasonable for me to
> conclude that this had some bearing on your
> diagram.

No it was not !
You assumed something that nobody discussed.


> Then please kindly explain to me what exactly it
> is that you are posting here.
> Thank you.

There is an Upper chamber that is located central to the pyramid...is there a reason why it is located central of the structure?

There is also a pit in the subterranean chamber...why is it located at that specific spot?

And...an additional upper chamber, the Kc, why is it located at that specific spot?

I've given you many measures relating to the KC, but you refuse to accept what I'm telling you.
So assemble all that I have posted over the seasons and then you will have the answer.
...enjoy!

Best.
Clive


Subject Author Posted

Uncovering another pi value in G1 using degrees

Clive September 10, 2008 09:15AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 09:55AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:02AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 10:07AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 12:26PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 02:21PM

Re: Uncovering another pi value in G1 using degrees

Dave L September 11, 2008 02:00AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 11, 2008 09:17AM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:56PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 10, 2008 01:00PM

Oops

Jon_B September 10, 2008 02:29PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 04:41PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 07:23PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:09PM

**Moderation note**

Hermione September 11, 2008 09:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 11, 2008 01:53PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 11:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 02:18PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 05:17PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 07:55PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:27PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:04PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 10:28PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:18AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 11:58AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 08:54PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:24AM

**Sub-thread closed**

Hermione September 15, 2008 09:59AM

**Moderation note**

Hermione September 15, 2008 07:48AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 12, 2008 09:07PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 08:23AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:36PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 03:15PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:39PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:22PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 05:40PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 07:12PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:26AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 15, 2008 04:03AM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:57AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 02:40PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 03:46PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:16PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:24PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:37PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:07PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 16, 2008 10:03AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 16, 2008 06:37PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 17, 2008 12:17AM

Re: Uncovering another pi value in G1 using degrees

Chris Tedder September 17, 2008 07:55AM

So-called 45* line at Giza

Kanga September 17, 2008 08:39AM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 12:20PM

Re: So-called 45* line at Giza

Jon_B September 18, 2008 02:18PM

Re: So-called 45* line at Giza

Don Barone September 18, 2008 02:35PM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 05:29PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 17, 2008 03:39AM

Re: correction to post

MJ Thomas September 11, 2008 11:01AM

Re: correction to post

Don Barone September 11, 2008 11:50AM

Re: correction to post

MJ Thomas September 11, 2008 02:16PM

Re: correction to post

Don Barone September 11, 2008 02:33PM

Re: correction to post

MJ Thomas September 11, 2008 05:39PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:49PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 12, 2008 10:04AM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 10:56AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:39PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 13, 2008 03:51PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:41PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:20AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 12:18PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 14, 2008 03:59AM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:45AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 09:05PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:25AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 03:47PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:58PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 10, 2008 10:00PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 11:51PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 11, 2008 12:00AM

Re: Uncovering another pi value in G1 using degrees

Clive September 11, 2008 12:56AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 01:59AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 02:00PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:29PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:34PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:44PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:49PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 13, 2008 07:34PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 14, 2008 12:11AM

And now for something completely different Clive: Drafting the pyramids

Don Barone September 13, 2008 09:23PM

Re: And now for something completely different Clive: Drafting the pyramids

Don Barone September 14, 2008 12:48AM

small addendum ....

Don Barone September 14, 2008 08:23AM

Re: And now for something completely different Clive: Drafting the pyramids

Clive September 14, 2008 01:09PM

Re: And now for something completely different Clive: Drafting the pyramids

lobo-hotei September 14, 2008 04:05PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 12:01PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 01:07PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 03:08PM

Pi for Chris, MJ, Clive et al

Don Barone September 18, 2008 06:32PM

An addendum as food for thought

Don Barone September 18, 2008 06:50PM

Re: Pi for Chris, MJ, Clive et al

Khazar-khum September 19, 2008 11:34PM



Sorry, only registered users may post in this forum.

Click here to login