Graham firstly thanks for the picture of the c/Rod.
However there is another one about with scaling across the bottom and up the sides.
Scale across the bottom = 33 to 1
Scale up the side of one row that I have = 14 to 1.
I understand what you say but if I place my interpretation of the C/Rod up to the Relieving Chambers all I Will receive is Gods. I will post another screen shot and see what happens.
I was mainly after the "crusher" reference as I reckon the Antechamber was a crusher not a lock on the outside of the KC.

Remove the KC's Walls and ask yourself.

Why slide Guides for one lowering?
Why sharp flat edges To the guides?
Why the elongated holes in the block in Jon/B's? photo.
Why the polished surface to the center of the holes in the same block.
Why dose one "air shaft" line up with the Antechambers?
I see the center block as being twice the weight of the other two so very little force would be required to operate them once connected by ropes attached to a pole leverage system.
The Leaf block gap was for tensioning the ropes once they stretched.


Regards,
Megamont.
Wisdom is divided into two parts,(a) Having a lot to say and (b) Not saying it.