So what exactly does this mean. Well what it means is that:
a) the measurement of G2 is directly related to Phi. I do not believe that this can ever be disputed again and what the builders have done is that taking a distance of 1/Phi or 0.618034 units and dividing it into Phi squared gives us the measurement of G2. It is truly remarkable and is going to be very tough to argue for co-incidence of this one so here is the formula for the distance of The Pyramid if Khafre IN ANY UNITS !!!!!
(1/Phi x Phi squared) x 1000 = distance of 1/2 the base of The Pyramid of Khafre in inches
2.618034 / 0.618034 = 4.236068 x 1000 = 4236.068
or even simpler
Phi cubed x 1000 = precisely the number of inches in 1/2 of the base of The Pyramid of Khafre in inches ...
============================================================================================
These numbers seem to be the final conclusions based on many years of research. They are as follows.
PLEASE NOTE: None of the pyramids are exactly square nor are all the sizes the same. Was it error or were they trying to tell us a multitude of things. Regardless here is what at least one of the measurements were and are for each of the three main pyramids at Giza ...
G1 = 9069.13 inches
G2 = 8472.14 inches
G3 = 4154.25 inches
Solution:
G1 = (Phi cubed x 2 x 1000 / Phi) x square root of 3 = 9069.13
G2 = Phi cubed x 1000 x 2 = 8472.14
G3 = 9069.13 / [(1 / Pi x 10) - 1) = 4154.25
Please note it is all about Phi and Pi and the square root of 3 ... Just a fluke ? Just a simple co-incidence that these three pyramids can be obtained using these simple formulae ?
I doubt it.
Cheers
DON
"There is nothing as impenetrable as a closed mind"
and ..." if everything is a coincidence what is the point of studying or measuring or analyzing anything ?" db