Hi Greg ...

The blue is the area of P1 and P3 which would be covered if we extend the pyramids down to sea level.

This was based based on Jim Allison's posted elevations as per Butler of these measurements:

G1: 394 cubits (above sea level)
G2: 408 cubits (above sea level)
G3: 268 cubits (above sea level)

G1: 394 cubits --- Present height = 280 cubits --- down to sea level = 394 - 280 = 114 cubits

G2: 408 cubits --- Present height = 274.13 cubits --- down to sea level = 408 - 274.13 = 133.87 cubits

G3: 268 cubits --- Present height = 125.133 --- down to sea level = 268 - 125.133 = 142.867cubits

Here is my version (drawn prior to me reading his website) of all three as they would appear extended down to sea level.



And here is an image incorporating this latest data ...



Why would they base it on sea level ? I honestly do not know at this point but as I said on another board the interesting thing about doing this (basing it on sea level ) is that no matter how much of the pyramid was showing be it 20 cubits or all of it, you could always calculate back to this base sea level plan assuming just two things. One that there are still seas ( and the level has not changed) and two that you knew how to calculate differences in elevation and knew enough geometry in order to calculate down to sea level.

Regardless of the why it appears to work quite well and again if they are co-incidences I have to be getting close to getting a medal of sorts for being one of the champion co-incidence finders,

Best Regards
Don Barone

"There is nothing as impenetrable as a closed mind"
and ..." if everything is a coincidence what is the point of studying or measuring or analyzing anything ?" db