Thanks Don,
I looked at the Bent-Red relationship because of a discussion started by Jim Alison on the GH board. I cleaned out the temporary internet files (including cookies) on my computer and now cannot log in. So, I posted it here.
Assumptions
(From Jim Alison and Graham Chase)
A Bent base = 360
B Bent enclosure side = 560
C Red base = 420
D Red enclosure side = 480
E Red-Bend azimuth = 171.216
F Bent center to Red center = 3900.3
Construction
(B = Bent, Be = Bent Enclosure, R = Red, Re = Red Enclosure)
1 Line from Be S 0/4 through Be N 0/4
2 Line from Be S 4/4 through Be N 3/4 through Intersection with #1
3 Circle at Intersection, radius Be W 1/4, defines R N base at #1
4 Line West from #3 defines R NW corner at #2
5 Line SE from #4
6 Line from Be N 2/4 through Intersection defines R center at #5
7 Circle at Intersection, radius Be N 1/4, defines R SE corner at #5
8 Line from Be N 4/4 through Intersection defines Re SW corner at R extended diagonal
C. Wayne Taylor
Richmond, Virginia USA