Home of the The Hall of Ma'at on the Internet
Home
Discussion Forums
Papers
Authors
Web Links

April 24, 2024, 8:32 pm UTC    
August 18, 2021 09:14AM
keeperzz Wrote:
-------------------------------------------------------

> All facts indicate that the shafts are not air
> shafts:

Except that they are perfectly engineered to let in fresh air and take out stale air and fumes.

> b) The shape of the shafts - KC shafts do not
> follow the shortest path to the surface;

Actually they are the shortest route to the surface.

But this isn't why they are the way they are. I believe they are the way they are in part because they need to be sloped for better air flow under low wind conditions such as temperature inversions.

> c) Duplication of the shafts - why are two shafts
> needed in the chamber, if only the southern one
> could be used, and air could pass through the
> passages of the pyramid from the entrance in the
> north;

It's because the wind direction could be out of the north or south.

But remember I'm suggesting there were at least two other uses for these shafts that must be considered to determine their characteristics. But as ventilation shafts that work under any conditions they are almost ideal.

> d) the QC shafts were closed from the inside, so
> that they never supplied air to the chamber;

I believe they needed to access the so called queens' chamber under some conditions so the airshafts were built in the event it proved they needed to during working days. It turned out that this access proved unnecessary so the shafts were never opened to the interior.

> e) as you correctly noted, all work in the inside
> apartments can be performed simultaneously with
> the erection of the core masonry (it is unlikely
> that the internal work will take more time than
> the creation of core layers), so all internal work
> can be completed in the open air.

No, this is not "correct". It is a contention that the pyramid was completed from the ground up using ramps. There is no evidence to support such a contention. I believe that there was ongoing work in the grand gallery from the time the stepped structure first achieved 80' in altitude and this work of lifting weight continued until every step was filled in and the top 80' of the pyramid was installed. Some of this work may have continued right up until the last casing stone was emplaced on the middle of the north side but this won't be apparent until the data from the infrared scan is finally released.

> I hope the air-shaft adepts don't take seriously
> the idea of airing the royal remains smiling smiley

The "royal remains" ascended to heaven on the smoke of incense.

____________
Man fears the pyramid, time fears man.
Subject Author Posted

Everything you wanted to know about air shafts but were afraid to ask

Hans August 14, 2021 04:43PM

Re: Everything you wanted to know about air shafts but were afraid to ask

Kanga August 14, 2021 09:38PM

Re: Everything you wanted to know about air shafts but were afraid to ask

Corvidius August 15, 2021 02:06AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hans August 15, 2021 08:01AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 15, 2021 08:48AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hans August 15, 2021 08:55AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 15, 2021 09:21AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hans August 15, 2021 12:51PM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 15, 2021 04:31PM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 15, 2021 05:56PM

Re: Everything you wanted to know about air shafts but were afraid to ask

Corvidius August 16, 2021 02:01AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Corvidius August 16, 2021 04:19AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 16, 2021 05:57AM

Re: Chimneys

Mark Heaton November 30, 2021 04:07PM

Purpose of the shafts

keeperzz August 15, 2021 05:42AM

Re: Purpose of the shafts

Hermione August 15, 2021 06:09AM

Re: Purpose of the shafts

keeperzz August 15, 2021 07:56AM

Re: Purpose of the shafts

Hermione August 15, 2021 08:50AM

Re: Purpose of the shafts

keeperzz August 15, 2021 12:34PM

Re: Purpose of the shafts

cladking August 15, 2021 09:17AM

Re: Purpose of the shafts

keeperzz August 15, 2021 10:48AM

Re: Purpose of the shafts

cladking August 15, 2021 04:11PM

Re: Purpose of the shafts

keeperzz August 16, 2021 10:09AM

Re: Purpose of the shafts

cladking August 18, 2021 08:54AM

Re: Purpose of the shafts

cladking August 18, 2021 09:29AM

Re: Purpose of the shafts

Hans August 18, 2021 10:03AM

Re: Purpose of the shafts

cladking August 18, 2021 12:17PM

Re: Purpose of the shafts

Hans August 18, 2021 02:56PM

Re: Purpose of the shafts

cladking August 18, 2021 03:28PM

Re: Purpose of the shafts

Hans August 18, 2021 06:15PM

Re: Purpose of the shafts

cladking August 18, 2021 07:59PM

Re: Purpose of the shafts

Hans August 18, 2021 11:02PM

Re: Purpose of the shafts

keeperzz August 19, 2021 03:28AM

Re: Purpose of the shafts

cladking August 19, 2021 08:21AM

Re: Purpose of the shafts

keeperzz August 19, 2021 12:46PM

Re: Purpose of the shafts

Hans August 19, 2021 06:01PM

Re: Purpose of the shafts

Hermione August 20, 2021 04:04AM

Re: Purpose of the shafts

cladking August 20, 2021 09:18AM

Re: Purpose of the shafts

keeperzz August 19, 2021 02:35AM

Re: Purpose of the shafts

cladking August 19, 2021 08:53AM

Re: Purpose of the shafts

Corvidius August 17, 2021 11:50AM

Re: Purpose of the shafts

keeperzz August 18, 2021 06:31AM

Re: Purpose of the shafts

cladking August 18, 2021 09:14AM

Re: Purpose of the shafts

Hans August 18, 2021 10:15AM

Re: Purpose of the shafts

cladking August 18, 2021 12:24PM

Re: Purpose of the shafts

Hans August 18, 2021 03:06PM

Re: Purpose of the shafts

cladking August 18, 2021 05:28PM

Re: Purpose of the shafts

Hans August 18, 2021 06:21PM

Re: Purpose of the shafts

cladking August 18, 2021 08:10PM

Re: Purpose of the shafts

Hans August 18, 2021 11:09PM

Re: Purpose of the shafts

keeperzz August 19, 2021 02:06AM

Re: Purpose of the shafts

cladking August 19, 2021 09:13AM

Re: Purpose of the shafts

M. Williams November 27, 2021 02:10PM

Re: Purpose of the shafts

Byrd November 27, 2021 04:06PM

Re: Purpose of the shafts

M. Williams November 27, 2021 06:34PM

Re: Purpose of the shafts

Hermione November 28, 2021 04:41AM

Re: Purpose of the shafts

M. Williams November 28, 2021 12:39PM

Re: Purpose of the shafts

M. Williams November 28, 2021 01:38PM

Re: Purpose of the shafts

Hermione November 28, 2021 05:03AM

Re: Purpose of the shafts

M. Williams November 28, 2021 01:07PM

Re: Purpose of the shafts

Hans November 28, 2021 03:10PM

Re: Purpose of the shafts

M. Williams November 28, 2021 04:20PM

Re: Purpose of the shafts

Hans November 28, 2021 10:15PM

Re: Purpose of the shafts

M. Williams November 28, 2021 10:42PM

Re: Purpose of the shafts

Hans November 29, 2021 12:29PM

Re: Purpose of the shafts

M. Williams November 29, 2021 12:34PM

Re: Purpose of the shafts

Hans November 29, 2021 01:13PM

Re: Purpose of the shafts

M. Williams November 29, 2021 01:34PM

Re: Purpose of the shafts

M. Williams November 29, 2021 01:25PM

**Moderation note**

Hermione November 29, 2021 03:08PM

Re: Purpose of the shafts

M. Williams November 29, 2021 03:35PM

Re: Purpose of the shafts

M. Williams November 29, 2021 03:55PM

Re: Purpose of the shafts

Hermione November 29, 2021 03:05PM

Well lets try that again

Hans November 29, 2021 05:41PM

Re: Well lets try that again

Hermione November 30, 2021 03:37AM

Re: Well lets try that again

M. Williams November 30, 2021 09:26AM

Re: Well lets try that again

M. Williams November 30, 2021 09:33AM

Re: Well lets try that again

M. Williams November 30, 2021 10:21AM

Re: Well lets try that again

M. Williams November 30, 2021 10:43AM

Shaft data missing

Kanga August 16, 2021 11:50PM

Re: Shaft data missing

Hermione August 17, 2021 03:53AM

Re: Shaft data missing

keeperzz August 17, 2021 10:17AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Anonymous User August 17, 2021 12:55AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Kanga August 17, 2021 01:27AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Anonymous User August 17, 2021 02:18AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Hermione August 17, 2021 03:47AM

Re: Everything you wanted to know about air shafts but were afraid to ask

Kanga August 17, 2021 10:43PM

The elephant in the room

robin cook August 19, 2021 03:49AM

Re: The elephant in the room

Hermione August 19, 2021 04:21AM

Re: The elephant in the room

keeperzz August 19, 2021 06:53AM

Re: The elephant in the room

Kanga August 19, 2021 08:35PM

Re: The elephant in the room

Hermione August 20, 2021 03:41AM

Re: The elephant in the room

keeperzz August 20, 2021 06:46AM

Re: The elephant in the room

engbren August 20, 2021 08:00AM

Magli on KC offset and shafts

Kanga August 20, 2021 08:59PM

Re: Magli on KC offset and shafts

keeperzz August 21, 2021 08:05AM

Re: The elephant in the room

keeperzz August 21, 2021 08:04AM

Re: The elephant in the room

Kanga August 21, 2021 10:45PM

Re: The elephant in the room

keeperzz August 24, 2021 08:22AM

Re: The elephant in the room

cladking August 19, 2021 09:56AM

Re: The elephant in the room

keeperzz August 19, 2021 03:35PM

Re: The elephant in the room

Hermione August 19, 2021 04:25PM

Re: The elephant in the room

Hans August 19, 2021 06:17PM

Re: The elephant in the room

robin cook August 20, 2021 02:51AM

The Air-Channels of Chephren's Pyramid I. E. S. EDWARDS

Hermione August 30, 2021 10:47AM

Re: The Air-Channels of Chephren's Pyramid I. E. S. EDWARDS

Hans August 30, 2021 01:10PM



Sorry, only registered users may post in this forum.

Click here to login